Services

Hydraulic Design and Construct

Whether you require hydraulic engineering advice or you require complex schematics and system commissioning, RRPS can deliver an engineering solution perfect for your needs.

Plumbing for New Housing

There are many facets to plumbing, which can complicate matters – particularly when you are looking to buy or build a new home. Put your castle in hands you can trust, from Pre-laying the drains to the final fitting of tap ware and fixtures RRPS has got you covered.

Remote Commercial Plumbing

RRPS deliver Engineering, procurement, construction and management of plumbing systems for commercial projects throughout Australia, both rural and remote locations.

Commercial & Domestic Maintenance

Minor plumbing works is the alteration, repair or maintenance of existing water supply, sanitary and/or drainage plumbing systems, including: • maintenance, repair or replacement of water supply plumbing. All RRPS are trained on all plumbing systems, as our clients deserve the best service for any type of plumbing required.

Plumbing Audits and Inspections

From in-ground services to roofing and gutters and mechanical services RRPS can provide complete plumbing system audits and inspections.

Renewable Water Heating Technology

RRPS can install renewable systems that are designed to make your home, business or industry more environmentally friendly and cost saving. With the latest range of hot water heat pumps that have been designed for harsh Australian conditions and utilises heat from the air to generate energy efficient hot water. No matter which system you require, our expert team can help you make an informed purchase.

Roof Plumbing

The construction, installation, replacement, repair, alteration, maintenance, testing or commissioning of any roof covering or roof flashing or any part of a roof drainage system involved in the collection or disposal of stormwater, which connects to ground level.

Poly Welding and installation services

Butt (Heat Fusion) Welding, is a welding process used to join two different pieces of a thermoplastic. This process involves heating both pieces simultaneously and pressing them together. The two pieces then cool together and form a permanent bond. When done properly, the two pieces become indistinguishable from each other. This process is commonly used in plastic pressure pipe systems to join a pipe and fitting together, or to join a length of pipe directly to another length of pipe. Generally, polyolefins (such as polypropylene, polyethylene, and polybutylene) are used for these applications.

Electrofusion Welding is a method of joining HDPE and other plastic pipes with special fittings that have built-in resistive wire which is used to weld the joint together. The pipes to be joined are trimmed, cleaned, inserted into the electrofusion fitting (with a temporary clamp if required) and a voltage (typically 40V) is applied using a device called an electrofusion processor. The processor controls how much voltage is applied, and for how long, depending on the fitting in use. As current is applied to the resistive wire, the coils heat up and melt the inside of the fitting and the outside of the pipe wall which weld together producing a very strong homogeneous joint. The assembly is then left to cool for a specified time. The joints produced tend to be more reliable than threaded fittings sealed with O-rings.

Commercial & Domestic Hot Water Specialists

RRPS has the knowledge and equipment to quickly repair, replace and service all types of hot water systems from Gas, Electric, continuous flow and or heat pumps of all makes and models

RRPS also installs and maintains commercial hot water heating systems and can provide flexible solutions for your commercial hot water heating requirements.

Water Treatment and Filtration

Water treatment is any process that makes water more acceptable for a specific end-use. The end use may be drinking, industrial water supply, irrigation, water recreation or many other uses, including being safely returned to the environment.

Water consumed by humans should of course be free of harmful contaminants and micro-organisms. But it should also contain some benign “contaminants” – minerals and salts in trace quantities that our bodies use for healthy purposes.

RRPS can provide engineering design and support to make sure you are getting the best water treatment solution for you needs.

Waste Water Treatment

Sewage treatment is the process of removing contaminants from wastewater, primarily from household sewage. It includes physical, chemical, and biological processes to remove these contaminants and produce environmentally safer treated wastewater (or treated effluent).

At RRPS we can provide solutions for the installation and maintenance of all Waste Water Treatment Plants.

Backflow

Backflow is a reversal of the normal direction of water flow in a water supply plumbing system. It occurs when the water delivery main is at a lower pressure than the internal plumbing system (back siphonage or Cross Connection). Back siphonage can occur when there is a burst or ruptured water main, or due to excessive demand during fire-fighting operations or other periods of high demand. Only a licensed plumbing contractor may install and maintain backflow prevention devices. Please contact us at RRPS for more Info.

Gas – LPG and NG

Whether it’s gas appliance, heating water or full gas piping system, RRPS can cover all of your new installation and gas maintenance needs including leak detection and repairs.

Mech Services - Piping systems (Oils, Coolant, Air, Fuels, Ad Blue)

We offer services for the installation of Hydraulic Piping Systems, whether its oil line, diesel lines, flow & return lines from your supply tanks to pumps and machinery for high and low pressure applications.